Every Patrol Proven.
Every Post Watched.
IN Security brings patrol verification and post monitoring together in one platform — so your entire security operation runs from a single Control Center.
Two Tools, One Platform
Two purpose-built devices, each solving a different problem — both able to feed into a single Control Center that can bring their handling together.
IN Guard
Verifies that patrol routes are actually walked, checkpoint by checkpoint, on time — with a full, timestamped record of every round.
How IN Guard works→
IN Sense
Watches over guards holding a stationary post, automatically flagging it the moment their attention drifts into sleep on duty.
How IN Sense works→
IN Guard in a Guard's Pocket
No training manual required — just turn it on and go.
- Start of shift: press the power button, put it in the pocket, and start walking the route — that's the entire setup.
- During the patrol: IN Guard quietly tracks itself in the background, with nothing for the guard to check or log by hand.
- If something feels wrong: one press of the button sends an immediate alarm to the control room — no radio, no phone call, no hesitation.
- If a guard goes down: IN Guard notices on its own and raises the alarm automatically, even if they can't reach the button.
- End of shift: drop it in the charger, and it's ready to go for the next patrol.
IN Guard: How It Works
Built around the IN Guard tracker and a LoRaWAN base station, running entirely on your own network.
Define Checkpoints
Set the checkpoints a patrol route must cover, each with a target time window, an allowed time deviation, and a distance radius.
Track in Real Time
As the guard walks the route, IN Guard continuously records its exact position in the background.
Sync Automatically
That position data reaches the base station on its own — streamed live when in range, or delivered all at once the moment the guard reconnects.
Verify Automatically
The Control Center compares the recorded route against every checkpoint, automatically flagging missed, late, or off-route visits.
Review & Optimize
Supervisors watch patrols live or use the Archive to review history, spot bottlenecks, and refine routes over time.
IN Guard: The Hardware
A single base station supports up to 200 trackers, and additional stations can be added to extend coverage across large or demanding sites. IN Guard is currently a working prototype — its final form factor can be tailored to your specific requirements.
Long-Range, Encrypted & Fully On-Premise
IN Guard talks to its base station over the 868 MHz ISM band using LoRaWAN, secured end to end with AES-128 encryption — only devices explicitly registered to your system can ever transmit. The base station connects only to your own control PC (Wi-Fi, LTE, or wired Ethernet), so patrol data never has to leave your network.
Precise, Continuous Positioning
A built-in multi-constellation GNSS receiver (GPS, GLONASS, Galileo, BeiDou) logs the tracker's exact position every 15 seconds, storing up to 500 points on-device and uploading them the moment it's back in range of the base station.
Built for a Full Shift
An onboard battery keeps IN Guard running for several hours of continuous patrol work. Recharge it with a standard USB-C cable, or use the dedicated docking station that charges three units at once.
Two Layers of Guard Safety
A one-touch panic button sends an immediate priority alert to the control room. A built-in motion sensor also watches for falls — if the device stays motionless and horizontal past a set time, the control room is alerted automatically.
Inside the Control Center
One piece of software, running on your own machine — no external server, no cloud dependency, and even the map works fully offline. The same Control Center will also surface IN Sense alerts, right alongside your patrol data — meet IN Sense next.
Live View
Select any tracker from the list and watch its patrol unfold in real time — checkpoint by checkpoint, with the exact arrival time for each one. Time and distance buffers are fully adjustable per route, so verification matches the realities of your site.
Route & Checkpoint Editor
Add, edit, or remove checkpoints and entire routes in a few clicks, no developer support needed — as your facility layout or procedures change, the system changes with you.
Archive & Analytics
Every checkpoint is automatically classified as early, on-time, late, or missed. Filter past patrols by device, date, or time range to dig into the details — spot bottlenecks, recurring delays, or danger zones, and use the data to optimize future routes.
The software can also be extended and integrated with other systems if your operation needs it.
Let's talk about your challenges→
Meet IN Sense
The sensor doing the work: small, unobtrusive, and built to stay out of the way of the job.
- Fits any post layout: ceiling mount, boom arm, or a mobile stand you can move between booths.
- No cameras, no wearables — just a compact unit doing its job quietly in the background.
- Positioned just above or beside the guard's chair — without ever requiring anything worn on the body.
IN Sense: How It Works
A radar sensor that watches over a stationary post — no cameras, no wearables.
- Works at a distance (1-3 m): no wearable required on the guard.
- Passive breathing measurement: the sensor tracks chest micro-movements in the background, confirming presence and alertness even when the guard is stationary.
- Shift handover & third-party detection: the system registers when shifts change hands, and flags it if anyone unexpected enters the post.
- Smart, graduated alerts: first a discreet wake-up signal for the guard, then immediate escalation to the Control Center if it doesn't resolve.
- Schedule optimization: alertness-dip data helps plan shift rotations and breaks more effectively on demanding night shifts.
From Alert to Drowsy: Captured in a Single Chart
A real breathing measurement, recorded end to end by IN Sense.
- This 30-minute record shows a guard settling into a stationary post, with the sensor placed 1.5 meters away.
- After several minutes, the breathing rate noticeably slows down as alertness drops.
- IN Sense automatically flags this as a graduated alert — first a discreet wake-up signal, no supervisor watching a screen required.
IN Sense can be added to any stationary post — gatehouse, booth, or control room — without disrupting how your team already works.
Talk to us about your posts→Why It Pays Off
Beyond verification — measurable impact on compliance, coverage, and cost.
Audit-Ready Compliance
Every patrol and every stationary post is timestamped and verified automatically — a ready-made record for audits, clients, or insurance.
Nothing Falls Through the Cracks
A missed checkpoint is flagged immediately. At a stationary post, sudden movement, a struggle, or a suspected fall triggers an instant alert.
Smarter Staffing Decisions
Real patrol data — not guesswork — shows you where to add coverage and where routes can be trimmed, raising efficiency without adding headcount.
Complete Anonymity
No cameras, no image analysis — across both tools, guards are monitored for presence and alertness, never watched or recorded like on video.
One Platform, Built to Extend
IN Sense alerts and IN Guard patrol data may land in the same Control Center, which can also integrate with your other security systems.
Lower Staff Turnover
The SOS button and fall detection give guards constant on-the-job safety — support that helps keep good people in the role.
Where IN Security Fits
Anywhere a patrol route needs to be walked, or a post needs to be watched.
Secure Every Patrol. Watch Every Post.
Talk to our team about bringing patrol tracking, post monitoring, and verification to your facility.